Keywords
Automotive engineering education, research methods, research types, thesis topics
Document Type
Article
Abstract
This study aims to analyze the topics and types/methods of research in the thesis of students of the Automotive Engineering Education study program, Universitas Negeri Yogyakarta. This research is descriptive research. The types/methods were descriptive models, Action Research, Ex Post-Facto, Research and Development, Evaluation, and Experimental Research (100, 69, 50, 35, 30, and 23 studies respectively). The study was conducted by analyzing 320 student thesis articles published from 2014 to 2018 in the Yogyakarta State University student e-journal. The results showed that the student's thesis topics consisted of 5 research topics, namely: education (139 topics), learning (120 topics), media development (43 topics), university issues (9 topics), and automotive engineering topics (9 pieces). Based on the results of the research, the types/research methods used were categorized into six methods, namely descriptive models (100 studies), classroom action research (69 studies), ex-post-facto (50 studies), research and development (48 studies), evaluation (30 studies), research and experimental (23 studies).
Page Range
34-42
Issue
1
Volume
12
Digital Object Identifier (DOI)
10.21831/jpv.v12i1.47310
Source
https://journal.uny.ac.id/index.php/jpv/article/view/47310
Recommended Citation
Siswanto, I., Ma, H., & Kurniawan, S. (2022). An analysis on students' thesis topics and research types in automotive engineering education program. Jurnal Pendidikan Vokasi, 12(1), 34-42. https://doi.org/10.21831/jpv.v12i1.47310
References
Aditya, E. I., & Sutiman. (2017). Pengaruh minat belajar dan fasilitas belajar terhadap prestasi belajar memelihara/service sistem bahan bakar bensin. E-Jurnal Pendidikan Teknik Otomotif - S1, 21(1), 95-104. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10190
Arifin, Z., Haryana, K., Solikin, M., & Siswanto, I. (2014). Penyelarasan kurikulum jurusan pendidikan teknik otomotif FT UNY berbasis kerangka kualifikasi nasional Indonesia. Jurnal Pendidikan Teknologi Dan Kejuruan, 22(1), 119-126. https://doi.org/10.21831/jptk.v22i1.8844
Creswell, J. W. (2012). Educational research: Planning, conducting, and evaluating quantitative and qualitative research (4th ed.). Pearson Education. http://repository.unmas.ac.id/medias/journal/EBK-00121.pdf
Emilio Álvarez-Arregui, RodrÃguez-MartÃn, A., Madrigal-Maldonado, R., Grossi-Sampedro, B.-Á., & Arreguit, X. (2017). Ecosystems of media training and competence: International assessment of its implementation in higher education. Comunicar, 25(1), 105-114. https://doi.org/10.3916/C51-2017-10
Fathumina, E. (2018). Analisis produktivitas bengkel Nissan Datsun Yogyakarta (Studi motivasi kerja dan produktivitas kerja teknisi) [Universitas Negeri Yogyakarta]. https://eprints.uny.ac.id/56958/1/Naskah Tugas Akhir Skripsi Erfin Fathumina FIX Print.pdf
Fehling, C. D., Muller, A., & Aehnelt, M. (2016). Enhancing vocational training with augmented reality. Proceedings of the 16th International Conference on Knowledge Technologies and Data-Driven Business. https://www.researchgate.net/profile/Mario-Aehnelt/publication/309373052_Enhancing_Vocational_Training_with_Augmented_Reality/links/5847afb908ae61f75ddff402/Enhancing-Vocational-Training-with-Augmented-Reality.pdf
Fitrianto, M. A., & Sudiyanto. (2018). Penerapan metode tutor sebaya untuk meningkatkan hasil belajar siswa pada mata pelajaran Teknologi Dasar Otomotif.
Haryana, K., Pambayun, N. A. Y., Sudiyanto, S., & Sutiman, S. (2019). Mapping the graduate quality of Automotive Engineering Education (S1) Study Program FT UNY. Journal of Physics: Conference Series, 1273(1), 012034. https://doi.org/10.1088/1742-6596/1273/1/012034
Hasanah, H., & Malik, M. N. (2018). Teaching factory-based for entrepreneurship learning model in vocational high schools. International Conference on Indonesian Technical Vocational Education and Association (APTEKINDO 2018), 209-213. http://eprints.unm.ac.id/16362/1/Artikel Prosiding International Conference - Teaching Factory-Based for Entrepreneurship....pdf
Hastowo, S., & Haryana, K. (2016). Manajemen sarana praktik program studi teknik ototronik SMK Taman Karya Madya Pertambangan Kebumen. E-Jurnal Pendidikan Teknik Otomotif - S1, 13(2), 1-13. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/2895
Irawan, B., & Solikin, M. (2017). Pengembangan media pembelajaran praktik pembangkit sinyal dan counter pada mata kuliah elektronika analog dan digital. Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 95-101. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10129
Jan Spilski, Giehl, C., Schlittmeier, S., Lachmann, T., Exner, J.-P., Makhkamova, A., Werth, D., Schmidt, M., & Pietschmann, M. (2019). Potential of VR in the vocational education and training of craftsmen. Proceedings of the 19th International Conference on Construction Applications of Virtual Reality, 181-190. https://www.researchgate.net/publication/337339626_POTENTIAL_OF_VR_IN_THE_VOCATIONAL_EDUCATION_AND_TRAINING_OF_CRAFTSMEN
Muhlisin, M., & Yuswono, L. C. (2018). Model pembelajaran kooperatif tipe Jigsaw untuk meningkatkan keaktifan dan hasil belajar PDTO. E-Jurnal Pendidikan Teknik Otomotif - S1, 24(1), 82-90. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/12222
Murwanto, A. D., & Wakid, M. (2017). Pengembangan desain perangkat aerodinamik mobil FG16 ditinjau dari hasil simulasi numeric aliran udara eksternal. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 122-130. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10132
Organisation for Economic Co-operation and Development. (2015). Frascati Manual 2015: Guidelines for collecting and reporting data on research and experimental development. OECD publications. https://doi.org/10.1787/9789264239012-en
Purnama, H. D., & Sudiyanto Sudiyatno. (2017). Pengaruh status keluarga terhadap minat siswa masuk perguruan tinggi. E-Jurnal Pendidikan Teknik Otomotif - S1, 21(1), 13-23. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10183
Santosa, D. T., & Us, T. (2016). Faktor-faktor penyebab rendahnya motivasi belajar dan solusi penanganan pada siswa kelas XI jurusan Teknik Sepeda Motor. E-Jurnal Pendidikan Teknik Otomotif S1, 3(2), 14-21. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/2896
Setiawan, W. H., & Yuswono, L. C. (2017). Penerapan metode pembelajaran Team Game Tournament (TGT) untuk meningkatkan keaktifan dan hasil belajar. E-Jurnal Pendidikan Teknik Otomotif S1, 20(1), 56-67. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10165
Shodiq, S. (2018). Analisis butir soal ujian akhir semester gasal mata pelajaran pemeliharaan listrik kendaraan ringan kelas XII di SMK Negeri 2 Klaten tahun ajaran 2017/2018 [Universitas Negeri Yogyakarta]. https://eprints.uny.ac.id/57059/
Siswanto, I., & Sampurno, Y. G. (2015). Faktor-faktor penghambat pengerjaan tugas akhir skripsi mahasiswa pendidikan teknik otomotif FT UNY. Jurnal Taman Vokasi, 3(1), 629-642. https://doi.org/10.30738/jtv.v3i1.313
Sodiq, R., & Haryana, K. (2017). Evaluasi penjaminan mutu pendidikan di SMK Negeri 1 Magelang. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 111-121. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10131
Surani, D., Kusuma, J. W., & Kusumawati, N. (2020). Platform online dalam perkuliahan pada masa pandemi Covid-19. Jurnal Pendidikan : Teori, Penelitian, Dan Pengembangan, 5(9), 1338-1349. https://doi.org/10.17977/jptpp.v5i9.14057
Suyanto, W., Budiman, A., Fatah, A., Efendi, Y., Latif, I., Yunanto, H. H., & Saputra, M. (2019). Competency analysis the field of expertise of automotive engineering in automotive engineering curriculum of FT UNY. Journal of Physics: Conference Series, 1273(1), 012035. https://doi.org/10.1088/1742-6596/1273/1/012035
Syakura, V. H., & Us, T. (2017). Pengembangan multimedia pembelajaran sistem kopling bidang keahlian teknik kendaraan ringan SMK Muhammadiyah 3 Yogyakarta. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 131-137. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10133
Uerz, D., Volman, M., & Kral, M. (2018). Teacher educators' competences in fostering student teachers' proficiency in teaching and learning with technology: An overview of relevant research literature. Teaching and Teacher Education, 70, 12-23. https://doi.org/10.1016/j.tate.2017.11.005
Wagiran, W. (2016). Profil pembelajaran di Fakultas Teknik Universitas Negeri Yogyakarta. Jurnal Pendidikan Vokasi, 6(3), 346-354. https://doi.org/10.21831/jpv.v6i3.10610
Warju, W., Ariyanto, S. R., Soeryanto, S., Hidayatullah, R. S., & Nurtanto, M. (2020). Practical learning innovation: Real condition video-based direct instruction model in vocational education. Journal of Educational Science and Technology, 6(1), 79-91. https://doi.org/10.26858/est.v6i1.12665
Wicaksono, C., & Sofyan, H. (2017). Kontribusi motivasi belajar, lingkungan belajar, dan kebiasaan belajar terhadap prestasi belajar siswa. E-Jurnal Pendidikan Teknik Otomotif - S1, 18(2), 138-144. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/10134
Yulfika, A., & Us, T. (2017). Penerapan model snowball throwing untuk meningkatkan keaktifan dan hasil belajar mapel PSPTKR. E-Jurnal Pendidikan Teknik Otomotif - S1, 24(2), 119-129. http://journal.student.uny.ac.id/ojs/index.php/otomotif-s1/article/view/12226
Yuswono, L. C., Martubi, & Sukaswanto. (2014). Profil kompetensi guru sekolah menengah kejuruan teknik otomotif di Kabupaten Sleman. Jurnal Pendidikan Teknologi Dan Kejuruan, 22(2), 173-183. https://doi.org/10.21831/jptk.v22i2.8925
