Developing project-based learning tools for light vehicle engine maintenance subjects at vocational high school

Authors

Muslim Muslim, Department of Automotive Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia
Ambiyar Ambiyar, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia
Dedi Setiawan, Department of Automotive Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia
Rido Putra, Department of Electronics Engineering, Faculty of Engineering, Universitas Negeri Padang, Indonesia

Keywords

learning tools, project-based learning, ADDIE model, validity, teacher response

Document Type

Article

Abstract

This study aims to develop learning tools for project-based light vehicle engine maintenance and describe the teacher's response to the application of project-based learning tools in light vehicle engine maintenance subjects. This research is a research and development (R&D) model with ADDIE. The ADDIE development model consists of analysis, design, development, implementation, and evaluation. The results showed that the product developed was valid in terms of validity, very practical in terms of practicality, and very high in the aspect of effectiveness. Based on the aspects of validity, it can be specified that the syllabus gets a percentage score of 90.25%, 88.78% learning implementation plan, 86.56% module, 88.93% job sheet, 87.5% achievement test instrument, and project test instrument 87.08%. Based on aspects of practicality assessed from the teacher's response, it can be specified that the syllabus gets a percentage score of 88.67%, 86.88% learning implementation plan, 88.75% module, 88.77% job sheet, 85.42% test instrument for learning outcomes, and 83.33% project test instruments. Overall, teachers find it helpful to develop project-based learning tools. Based on the effectiveness, the results of students' knowledge tests with the percentage of mastery learning in the knowledge area amounted to 86.67%, and the skill area amounted to 86.67% with very high criteria. Researchers can conclude that project-based learning tools on light vehicle maintenance subjects are in accordance with valid, practical, and effective criteria.

Page Range

22-33

Issue

1

Volume

10

Digital Object Identifier (DOI)

10.21831/jpv.v10i1.29564

Source

https://journal.uny.ac.id/index.php/jpv/article/view/29564

Recommended Citation

Muslim, M., Ambiyar, A., Setiawan, D., & Putra, R. (2020). Developing project-based learning tools for light vehicle engine maintenance subjects at vocational high school. Jurnal Pendidikan Vokasi, 10(1), 22-33. https://doi.org/10.21831/jpv.v10i1.29564

References

Abdillah, M. A. (2013). Kelengkapan job sheet dalam meningkatkan hasil belajar mata pelajaran kelistrikan otomotif pada siswa. Gardan, 3(1), 1-10.

Abdul, M. (2009). Perencanaan Pembelajaran. PT. Remaja Rosda Karya.

Anjaya, P. D., Susilaningsih, E., & Yulianto, A. (2019). Development of assessment instruments for learning process of mathematics in drawing geometry at the elementary school level of Karanganyar Regency. Journal of Primary Education, 8(3), 309-314.

Apriliana, F., & Warju, W. (2013). Pengembangan modul Engine Tuner EA-800A pada mata kuliah praktek Motor Bensin di Jurusan Pendidikan Teknik Mesin Fakultas Teknik Universitas Negeri Surabaya. JPTM, 01(02).

Arantes do Amaral, J. A., Gonçalves, P., & Hess, A. (2015). Creating a project-based learning environment to improve project management skills of graduate students. Journal of Problem Based Learning in Higher Education, 3(2), 120-130.

Arantes do Amaral, J. A., & Lino dos Santos, R. J. R. (2018). Combining project-based learning and community-based research in a Research Methodology course: The lessons learned. International Journal of Instruction, 11(1), 47-60. https://doi.org/10.12973/iji.2018.1114a

Arends, R. I. (2001). Exploring teaching: An introduction to education. Mc Graw-Hill Companies.

Aydın, S., Atalay, T. D., & Göksu, V. (2018). Project-based learning practices with secondary school students. International Online Journal of Educational Sciences, 10(3), 230-242. https://doi.org/10.15345/iojes.2018.03.015

Baghoussi, M., & El Ouchdi, I. Z. (2019). The implementation of the project-based learning approach in the Algerian EFL context: Curriculum designers' expectations and teachers' obstacles. Arab World English Journal, 10(1), 271-282. https://doi.org/10.24093/awej/vol10no1.23

Chiang, C. L., & Lee, H. (2016). The effect of project-based learning on learning motivation and problem-solving ability of vocational high school students. International Journal of Information and Education Technology, 6(9), 709-712. https://doi.org/10.7763/IJIET.2016.V6.779

Damayanti, N. K. A., Martha, I. N., & Gunatama, G. (2014). Pembelajaran menulis teks anekdot berpendekatan saintifik dengan model pembelajaran berbasis proyek (project based learning) pada siswa kelas X Tata Kecantikan Kulit 1 di SMK Negeri 2 Singaraja. Jurnal Pendidikan Bahasa dan Sastra Indonesia Undiksha, 2(1), 1-10. http://dx.doi.org/10.23887/jjpbs.v2i1.3283

Dick, W., Carey, L., & Carey, J. O. (2015). The systematic design of instruction (8th ed.). University of South Florida.

Faridah, W. N., & Warju, W. (2014). Pengembangan modul pembelajaran Injector Tester dan Ultrasonic Cleaner CNC-601A pada mata kuliah Praktik Motor Bensin Program Studi S-1 Pendidikan Teknik Mesin. JPTM, 02(03), 58-66.

Fatkhurrokhman, M., Permata, E., Ekawati, R., & Rizal, S. U. (2017). Pengembangan perangkat pembelajaran teknik digital berbasis project based learning di Jurusan Pendidikan Teknik Elektro. Jurnal Pendidikan Vokasi, 7(1), 101. https://doi.org/10.21831/jpv.v7i1.12547

Febriana, R. (2017). The effectiveness of project based learning on students' social attitude and learning outcomes. Jurnal Pendidikan Teknologi Dan Kejuruan, 23(4), 374-382. https://doi.org/10.21831/jptk.v23i4.14878

Gerhana, M. T. C., Mardiyana, M., & Pramudya, I. (2017). The effectiveness of project based learning in trigonometry. Journal of Physics: Conference Series, 1-6. https://doi.org/10.1088/1742-6596/895/1/012027

Habók, A., & Nagy, J. (2016). In-service teachers' perceptions of project-based learning. SpringerPlus, 5(83), 1-14. https://doi.org/10.1186/s40064-016-1725-4

Hamid, M. A., Aribowo, D., & Desmira, D. (2017). Development of learning modules of basic electronics-based problem solving in Vocational Secondary School. Jurnal Pendidikan Vokasi, 7(2), 149. https://doi.org/10.21831/jpv.v7i2.12986

Handoyo, L. D., & Listyarini, I. Y. (2018). Development of character assessment instruments in service-learning at Biology Education Department Sanata Dharma University. International Journal of Indonesian Education and Teaching, 2(1), 71-79. https://doi.org/10.24071/ijiet.2018.020108

Harmer, N., & Stokes, A. (2014). The benefits and challenges of project-based learning: A review of the literature. Pedagogic Research Institute and Observatory (PedRIO).

Hoesny, M. U. (2013). From syllabus design to curriculum development. Jurnal Linguistik Terapan, 3(1), 1-10.

Ismuwardani, Z., Nuryatin, A., & Doyin, M. (2019). Implementation of project based learning model to increased creativity and self-reliance of students on poetry writing skills. Journal of Primary Education, 8(1), 51-58. https://doi.org/10.15294 /jpe.v8i1.25229

Jaime, A., Blanco, J. M., Dominguez, C., Sanchez, A., Heras, J., & Usandizaga, I. (2016). Spiral and project-based learning with peer assessment in a Computer Science Project Management Course. Journal of Science Education and Technology, 25(3), 439-449.

Jumargo, J., Boenasir, B., & Ramelan, R. (2011). Peningkatan prestasi belajar kompetensi melakukan pekerjaan dengan mesin bubut menggunakan jobsheet hasil pengembangan. Jurnal Pendidikan Teknik Mesin, 11(02), 57-62.

Kricsfalusy, V., George, C., & Reed, M. G. (2018). Integrating problem- and project-based learning opportunities: Assessing outcomes of a field course in environment and sustainability. Environmental Education Research, 24(4), 593-610. https://doi.org/10.1080/13504622.2016.1269874

Kunandar, K. (2013). Penilaian autentik (Penilaian hasil belajar peserta didik berdasarkan Kurikulum 2013. Grafindo Persada.

Martiningsih, I., & Susilowati, S. M. E. (2019). Development of module based on scientific contextual additives material to increase learning outcomes and science process skills in junior high school. Journal of Innovative Science Education, 8(2), 128-137. https://doi.org/10.15294/JISE.V0I0.27790

Mauliana, M., Ikhsan, M., & Subianto, M. (2018). Development of learning tool with contextual teaching and learning (CTL) approach to improve student mathematical connection ability. Journal of Physics: Conference Series, 1-5. https://doi.org/10.1088/1742-6596/1088/1/012012

Mozas, A., & Barba-Colmenero, F. (2013). System for evaluating groups when applying project-based learning to surveying engineering education. Journal of Professional Issues in Engineering Education and Practice, 139(4), 317-324. https://doi.org/10.1061/(ASCE)EI.1943-5541.0000160

Muslim, M., Martias, M., & Nasir, M. (2019). Correlation of activities learning with learning outcomes student in vocational high school. VANOS Journal of Mechanical Engineering Education, 4(2), 45-56. http://dx.doi.org/10.30870/vanos.v4i2.6349

Nurhasanah, A., Subekti, S., & Patriasih, R. (2017). Analisis penggunaan jobsheet pada praktikum dasar boga di SMKN 9 Bandung. Media Pendidikan, Gizi dan Kuliner, 6(2), 1-8.

Prasetyo, Z. K. (2011). Pengembangan perangkat pembelajaran Sains terpadu untuk meningkatkan kognitif, keterampilan proses, kreativitas serta menerapkan konsep ilmiah peserta didik SMP. Universitas Negeri Yogyakarta.

Prosser, C. A., & Quigley, T. H. E. (1950). Vocational education in a democracy (Revised ed.). American Technical Society.

Purnamasari, V., & Wangid, M. N. (2016). Pengembangan perangkat pembelajaran berbasis scientific aproach untuk membangun karakter kepedulian dan kedisiplinan. Jurnal Pendidikan Karakter, 6(2), 167-180. https://doi.org/10.21831/jpk.v6i2.12047

Rusman, R. (2012). Belajar dan pembelajaran berbasis komputer: Mengembangkan profesionalisme guru abad 21. Alfabeta.

Sabbah, S. S. (2018). English language syllabuses: Definition, types, design, and selection. Arab World English Journal, 9(2), 127-142. https://doi.org/10.24093/awej/vol9no2.9

Sailin, S. N., & Mahmor, N. A. (2018). Improving student teachers' digital pedagogy through meaningful learning activities. Malaysian Journal of Learning and Instruction, 15(2), 143-173. https://doi.org/10.32890/mjli2018.15.2.7786.

Sari, B. K. (2017). Desain pembelajaran model ADDIE dan implementasiinya dengan teknik Jigsaw. Desain Pembelajaran di era ASEAN Economic Community (AEC) untuk Pendidikan Indonesia Berkemajuan, 87-102. http://eprints.umsida.ac.id/332/

Sari, V. P. E., & Mukhadis, A. (2017). The effect of problem-based learning with gallery project and locus of control on learning achievement. Jurnal Pendidikan Teknologi Dan Kejuruan, 23(4), 392-401. https://doi.org/10.21831/jptk.v23i4.14713

Serevina, V., Sunaryo, S., Raihanati, R., Astra, I. M., & Sari, I. J. (2018). Development of e-module based on problem based learning (PBL) on heat and temperature to improve student's science process skill. The Turkish Online Journal of Educational Technology, 17(3), 26-36.

Shin, M.-H. (2018). Effects of project-based learning on students' motivation and self-efficacy. English Teaching, 73(1), 95-114. https://doi.org/10.15858/engtea.73.1.201803.95

Shofwanthoni, A., Ridlo, S., & Elmubarok, Z. (2019). The development of authentic assessment instrument of Hajj Manasik practices of IX grade of SMP PGRI 10 Candi in Sidoarjo Regency. Journal of Educational Research and Evaluation, 8(1), 14-21. https://doi.org/10.15294/JERE.V8I1.28361

Soivan, S., & Rijanto, T. (2018). Pengembangan job sheet trainer Human Machine Interface (HMI) sebagai bahan ajar siswa pada mata pelajaran Instalasi Motor Listrik di SMK Negeri 3 Surabaya. Jurnal Pendidikan Teknik Elektro, 07(02), 159-165.

Sugiyono, S. (2017). Metode penelitian pendidikan (Pendekatan kuantitatif, kualitatif dan R&D). Alfabeta.

Suhadi, S. (2007). Petunjuk perangkat pembelajaran. Universitas Muhammadiyah.

Syarif, M. (2016). Strategi pembelajaran. Rajawali Pers.

Trianto, T. (2014). Model-Model pembelajaran inovatif berorientasi konstruktivistik. Prestasi Pustaka.

Wahyuni, V., Kartono, K., & Susiloningsih, E. (2018). Development of project assessment instruments to assess mathematical problem solving skills on a project-based learning. Journal of Educational Research and Evaluation, 7(2), 147-153.

Wekesa, N. W., & Ongunya, R. O. (2016). Project based learning on students' performance in the concept of classification of organisms among secondary schools in Kenya. Journal of Education and Practice, 7(16), 25-31.

Widyastuti, R., & Utami, I. S. (2018). Development of product-based job sheet as instructional media in vocational education. Journal of Educational Science and Technology (EST), 4(2), 119. https://doi.org/10.26858/est.v4i2.6064

Wiliam, D. (2013). Assessment: The bridge between teaching and learning (Vol. 21). National Council of Teachers of English. www.dylanwiliam.net

Winatha, K. R., & Abubakar, M. M. (2018). The usage effectivity of project-based interactive e-module in improving students' achievement. Jurnal Pendidikan Teknologi Dan Kejuruan, 24(2), 198-202. https://doi.org/10.21831/jptk.v24i2.20001

Yulaelawati, E. (2004). Kurikulum dan pembelajaran. Pakar Raya.

Zancul, E. de S., Sousa-Zomer, T. T., & Cauchick-Miguel, P. A. (2017). Project-based learning approach: Improvements of an undergraduate course in new product development. Production, 27(spe), 1-14. https://doi.org/10.1590/0103-6513.225216