•  
  •  
 

Keywords

asesmen; confirmatory factor analysis; instalatur listrik; assessment; electrical installer

Document Type

Article

Abstract

Penelitian ini bertujuan menghasilkan asesmen instalatur listrik (AILIS) berbasis industri jasa konstruksi ketenagalistrikan. Penelitian AILIS dikembangkan melalui tiga tahap, yaitu: desain atau perencanaan, uji coba terbatas, dan uji coba diperluas. Tahap desain meliputi: kegiatan prasurvei, studi hasil-hasil penelitian, analisis masalah, dan analisis kinerja instalatur listrik. Kegiatan tahap uji coba terbatas meliputi: validasi pakar dan pengguna, analisis dan revisi. Uji coba diperluas meliputi: pengumpulan data, analisis, revisi, dan diseminasi. Data penelitian dikumpulkan dengan menggunakan instrumen berupa angket dan lembar observasi. Subjek uji coba berjumlah 210 responden para manajer perusahaan industri usaha jasa konstruksi ketenagalistrikan di Provinsi Sumatera Barat. Teknik analisis data untuk memvalidasi bahwa AILIS yang dihasilkan fit digunakan confirmatory factor analysis (CFA). Hasil penelitian menyimpulkan AILIS sangat baik untuk mengakses kinerja instalatur listrik industi usaha jasa konstruksi ketenagalistrikan, dengan indikator perancangan instalasi listrik, pengkonstruksian instalasi listrik, komisioning instalasi listrik, pengoperasian, dan pemeliharaan instalasi listrik.

Kata kunci: asesmen, confirmatory factor analysis, instalatur listrik

AN ASSESSMENT OF ELECTRICITY CONSTRUCTION BASED ON THE NEED OF SERVICE INDUSTRY OF ELECTRICAL INSTALLER

Abstract

The aim of this research was to produces an assessment of electricity construction service industrial needs-based electrical installer (AILIS). The research was developed through three stages, namely: the design, the limited trial, and expanded trials. The design consists of: pre-survey, studies on the research findings, problem analysis and analysis of electric installer performance. The limited trial included: validation of the AILIS through expert judgment and the user, analysis and revision. The expanded trial included: data collecting, analysis, revision, and dissemination. The research instruments consisting of a questionnaire and observation sheets were distributed to capture the data needed for the analysis. The subjects for the implementation were 210 respondents as the managers of electricity construction service industrial companies in West Sumatra Province. The CFA was used to verify that the developed model fit the AILIS. The finding shows that AILIS is excellent at assessing electrical installer performance in the electricity construction service industry, with indicator the design of electrical installation, the construction of electrical installation, the commissioning of electrical installation, the operation, and the maintenance of electrical installation. Keywords: assessment, confirmatory factor analysis, electrical installer

First Page

202

Last Page

216

Issue

2

Volume

19

Digital Object Identifier (DOI)

10.21831/pep.v19i2.5580

References

Adnan, A., Hussain, I., Ahmed, S., & Akbar, M.F. (2010). Performance Appraisals Impact on Attitudinal Outcomes and Organisational Performance. International Journal of Business and Management, 5(10), 62-75.

Amandemen PUIL. (2006). Amandemen Persyaratan Umum Instalasi Listrik (PUIL) 2000. Jakarta: Panitia Revisi PUIL.

Antoni, A. (1995). Kamus Lengkap Teknik Inggris-Indonesia. Surabaya: Gitamedia Press.

Anwir, B.S. (1983). Kamus Teknik (Cetakan Ketujuh). Jakarta: PT. Pradnya Paramita.

Aji, D.A. (2012). Instalasi listrik. (Online), (http://www.slideshare.net/fearzie13/instalasilistrikirdamaraji, akses 15 Juni 2012).

Asosiasi Kontraktor Listrik dan Mekanikal Indonesia (AKLI) Cabang Bukittinggi (2009). Laporan Hasil Survei Tahun 2009. Bukittinggi: Dewan Pengurus Asosiasi Kontraktor Listrik dan Mekanikal Indonesia (AKLI) Cabang Bukittinggi.

Asosiasi Kontraktor Listrik dan Mekanikal Indonesia-AKLI. (2012). Regulasi Berkaitan dengan Keberadaan AKLI. Jakarta: Asosiasi Kontraktor Listrik dan Mekanikal Indonesia.

Asosiasi Profesionalis Elektrikan dan Mekanikal Indonesia-APEI. (2008). Buku Pedoman Ujian Sertifikat Keterampilan Kerja. Jakarta: Asosiasi Profesionalis Elektrikan dan Mekanikal Indonesia.

Barbara, E., & Walvoord. (2010). Assessment Clear and Simple, Second Edition. San Francisco: John Wiley & Sons, Inc.

Barus, G. (2011). Pengembangan Instrumen Asesmen Kebutuhan Perkembangan untuk Penyusunan Kurikulum dan Evaluasi Program BK. Jurnal Penelitian dan Evaluasi Pendidikan, 15(1), 22-46.

Berry, B., & Adamson. (2011). Assessment Reform in Education Policy and Practice. New York: Springer Science Business Media B.V.

Chani, A. (2000). Peranan Sertifikasi untuk Peralatan Listrik. Proceedings Forum Studi Tegangan Tinggi Antar Universitas. Seminar Nasional dan Workshops Tegangan Tinggi III. ISBN: 979-96249-08. Kampus UI-Depok 20-21 Nopember 2000, 272-275.

David, D.G. (2006). Designing a competency-based program to facilitate the progression of experienced engineering technologists to professional engineer status. European Journal of Engineering Education, 31(1), 95-107.

Devan, J. (2013). Doing Business 2013 Smarter Regulations for Small and Medium-Size Enterprises. Comparing Business Regulations for Domestic Firms In 185 Economies (10th Edition). Washington: International Finance Corporation (IFC).

Dewan Perwakilan Rakyat RI. (2009). Undang-Undang No.30 Tahun 2009 tentang Ketenagalistrikan. Jakarta: Dewan Perwakilan Rakyat RI.

Elaine, D.P. (2004). Performance Management: A roadmap for developing, implementing, and evaluating performance management systems. Colorado: SHRM Foundation All rights reserved.

Hasibuan, M.S.P. (2006). Manajemen Sumber Daya Manusia Dasar dan Kunci Keberhasilan (Edisi Revisi). Jakarta: Bumi Aksara.

Idemobi, E.I., Onyeizugbe., & Chinedu. (2011). Performance Management as an Imperative for Effective Performance in Delta State of Nigerian Public-Owned Organizations. Sacha Journal of Policy and Strategic Studies, 1(2), 46-54.

IET. (2012). Electrotechnical Assessment Specification for Use By Certification And Registration Bodies. The International Electrotechnical Commission-EAS 12-304, Institution of Engineering and Technology (IET).

Jöreskog, K.G. & Sörbom, D. (2005). LISREL for Windows [Computer Software]. Lincolnwood, IL: Scientific Software International, Inc.

Kementerian Sekretariat Negara RI. (2012). Peraturan Pemerintah Republik Indonesia RI Nomor 14 Tahun 2012, tentang Kegiatan Usaha Penyediaan Tenaga Listrik. Jakarta: Kementerian Sekretariat Negara RI.

Komite Keselamatan Untuk Instalasi Listrik-KONSUIL. (2010). Perlu Mewaspadai Instalasi Listrik Rumah. Jurnal Nasional, p.16.

Kusrorong, R.P.B. (2013). Penyelenggaraan Pemerintahan dalam Pelayanan dan Kebijakan Publik Terkait dengan Aspek Ham dan Kesejahteraan. Diakses tanggal 3 Mei 2014 dari http://ejournal.unsrat.ac.id/index.php/governance/article/1036/838.

Lee, F.K. (2000). Using the Five-Factor Model (FFM) of Personality to Enhance Career Development and Organizational Functioning in the Workplace. Journal of Career Assessment, 8(4), 419-427.

Leila, N., Yadollah, H., & Ghiansi, M. (2011). Performance Evaluation and its Effects on Employees’ Job Motivation in Hamedan City Health Centers. Australian Journal of Basic and Applied Sciences, 5(12), 1761-1765.

Lembaga Pengembangan Jasa Konstruksi Nasional. (2008). Registrasi Usaha Jasa Pelaksana Konstruksi. Jakarta: Dewan Pengurus Lembaga Pengembangan Jasa Konstruksi Nasional.

Lembaga Pengembangan Jasa Konstruksi Provinsi Sumatera Barat. (2013). Data Badan Usaha Jasa dan Konstruksi Provinsi Sumatera Barat Tahun 2013. Padang: Dewan Pengurus Lembaga Pengembangan Jasa Konstruksi Provinsi Sumatera Barat.

Lynn, C. (2005). Senior Management Perceptions of Project Management Competence. International Journal of Project Management, 23, 7–16.

Malik, A. (2010). Pengantar Bisnis Jasa Pelaksana Konstruksi. Yogyakarta: C.V Andi Offset.

Mardapi, D. (2011). Penilaian Pendidikan Karakter. Yogyakarta: Universitas Negeri Yogyakarta.

Mardapi, D. (2012). Pengukuran Penilaian & Evaluasi Pendidikan. Yogjak

Download

Share

COinS